SCK-EKB開環系列霍爾電流傳感器 國產電流傳感器
SCK-EKB開環系列霍爾電流傳感器
應用霍爾效應原理開發的開環電流傳感器,能在原邊、副邊電隔離條件下測量直流、交流、脈沖以及各種不規則波形的電流
產品特點/Features
●按照結構圖中的電流箭頭標定的方向接入電流，注意電流的正反向。
Please install according to the direction of the arrow in the structure diagram, and pay attention to the positive and reverse
direction of current.
●按照結構圖中標定的功能管腳定義來接線（注意：錯誤的接線可能導致傳感器損壞）。
Please wire according to the definition of the functional pin illustrated in the structure diagram (Note: the inaccurate way of
installation may cause damage to the sensor).
●初級導體的溫度不應超過100℃。
Temperature of the primary conductor should not exceed 100°C.
●上述的規格為標準規格，我司可根據客戶要求定制產品。
This is a standard mode. We can provide the products according to your specifications.
穿孔尺寸 Primary through-hole：φ 40.5mm
主要尺寸/Main dimensions
總公差 General tolerance: ±0.5mm
使用說明/Directions for use
●易安裝
Easy Mounting
●電流測量范圍寬
Wide Frequency
●體積小，節省空間
Small size and space saving
●無插入損耗
No insertion losses
●開關電源(SMPS)
Switched Mode Power Supplies (SMPS)
●不間斷電源（UPS）
Uninterruptible Power Supplies
●通訊電源
Battery supplied applications
●直流電機驅動靜態轉換器
Static converters for DC motor drives
- 上一篇：沒有啦
- 下一篇：你知道工業馬達驅動設計中IGBT的作用 2023/7/3
